Powertrain coverage

Engine:

Engine block and cylinder heads, crankshaft and main bearings, camshaft and bearings, crankshaft gears, connecting rods and bearings, push rods, rings and pins, timing chain(s) or belts and gears, valve lifters, pistons, intake and exhaust valves, valve springs and retains, guides and lifters, rocker arm assemblies, oil pump, oil pan, pivots, shaft

Transmission:

– Automatic

Housing, torque converter, modulator valve, vacuum modulator, valve body, gear sets, main and intermediate shafts, oil pump, governor, clutches and bands.

– Standard

Housing, shifter fork and bearings, main and intermediate shafts, synchronizer mounts, pressure plate.

Transaxle/Differential:

1. Front Wheel Drive Vehicles (transaxle):- Housing, main shafts, bearings, crown and pinion
2. Rear Wheel Drive Vehicles (differential):- Housing, carrier gear and case, driver pinion and pinion gear, ring gear, differential cover, differential mounts, and bearings.
3. Auxiliary Differential and Transfer Case (4-wheel drive vehicles only when 4 by 4 option is purchased):- Case, gears and sprockets, internal bearings

Towing:

A-protect will reimburse the customer up to $50 per occurrence for towing expenses incurred due to a contract-covered breakdown. Valid receipt should be provided for reimbursement.

Trip interruption:

A-Protect will reimburse the customer for lodging, meals, bus, or taxi up to $50 or $150 for the term of the warranty.
If the authorized repair center is not able to provide the same-day services and/or is further away from home than 200 km one-way, a valid receipt must be provided for a reimbursement within seven days from occurrence.

Additional options

Seals &gaskets:

All seals and gaskets used to contain fluids and lubricants within the engine, transmission and differential/transaxle.

Head gaskets(s):

Cylinder head gasket(s).

Air conditioner:

Compressor, clutch assembly, receiver, dryer and evaporator.

Turbo & supercharger::

Housing, wastegate controller, compressor, intercooler, clutches and bypass valve.

Fuel system:

Gas & Diesel fuel injection pump, mechanical or electrical fuel pump, fuel pressure regulators, fuel tank and sending unit.

Cooling system:

Radiator fan motor and blades, fan clutch, heater control valve and coolant recovery unit.

Power steering:

Power steering pump, steering gear, rack and pinion assembly.

Front suspension:

Upper and lower control arms, upper and lower ball joints.

Supplementary package:

Water pump, motor mounts, oil pan, harmonic balancer, pulley, intake and exhaust manifold, axle shafts, CV joints and boots, hanger bearings.

4X4/AWD:

Transfer Case

Electrical:

Starter motor & solenoid, alternator & voltage regulator, windshield wiper motors & windshield washer pumps (front & rear), heater motor & fan.

Brakes:

Master cylinder, vacuum assist booster, disc brake calipers, wheel cylinders, proportioning valve, flexible brake fluid hoses, hydrolic steel lines & fittings. Excluding: brake pads, lining, rotors, drums & emergency brake components.